Casio Not available computer, comes with the camera, to connect it to your, 3. Use the USB cable that, 5.Double-click“Removable Disk”, 6.Right-clickthe “DCIM” folder

3. Use the USB cable that		USB port	USB cable (included)
comes with the camera
to connect it to your
computer.		Large connector
The camera will turn on
automatically and battery			[USB] port
charging will start (page 20).
• The camera may not turn
	on automatically in the
	case of certain computer		Small connector
	models or connection
	conditions. If this
	happens, press [p]	Making sure that the 8 mark on the USB cable
	(Power) to turn on the
	camera.	connector is towards the side opposite that of the
•	Make sure that you insert	monitor screen, connect the cable to the camera.
	the cable connector into
	the USB port until you
	feel it click securely into place. Failure to insert the connector fully can result in
	poor communication or malfunction.
•	Note that even while the connector is fully inserted, you
	still will be able to see the metal part of the connector as
	shown in the illustration.

•When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.

•Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computer’s USB port.

•The first time you connect the camera to your computer with the USB cable, an error message may appear on your computer. If this happens, disconnect and then reconnect the USB cable.

4.Windows 7, Windows Vista users: Click “Start” and then “Computer”.Windows XP users: Click “Start” and then “My Computer”.5.Double-click “Removable Disk”.

•Your computer recognizes the memory card loaded in the camera (or built-in memory if there is no card) as a removable disk.

6.Right-click the “DCIM” folder.7.On the shortcut menu that appears, click “Copy”.

83Using the Camera with a Computer