Disposing of the Camera

When disposing of the camera, be sure to first remove its built-in lithium ion battery and send it in for recycling.

IMPORTANT!

The battery of this camera is built-in and cannot be replaced by you. Contact your retailer or a CASIO authorized service center to have the battery replaced.

Make sure that the camera is turned off before removing the battery.

The edges of the back cover are sharp. Take care not to cut your fingers when removing it.

1.Turn off the camera.

2.

Open the camera’s frame until it and the

 

 

monitor screen panel form a 90 degree

 

 

angle.

Monitor screen

 

 

3.

Use a precision Phillips tip screwdriver

panel back cover

 

to remove the four screws that secure

Screws (4)

 

the monitor screen panel back cover in

 

 

 

place.

 

4.

Open the memory card slot cover.

Hooks

5. Use a flat-blade precision screwdriver to release the hooks and then lift the monitor screen panel back cover in the direction indicated by the arrow.

6. Peel the black tape from the battery.

Black tape

111

Appendix