Casio Not available Using the LED Light (LED), Changing the Image Size (Image Size), Off, Auto, Size and, (Pixels), Procedure, Procedure, Image Size, Description, Application

Using the LED Light (LED)

Procedure

Enter the REC Mode * MENU * LED

Use the LED light when shooting where lighting is dim. The effectiveness of the LED light is reduced the further you are from the subject.

Auto	LED lights automatically under dark shooting conditions.
On	LED always lights.
Off	LED never lights.

IMPORTANT!

•Do not turn on the LED light near a person’s eyes and do not allow anyone to look directly into the light.

•You should compose the image so the main subject is in the center of the image when using the LED light.

•Since the camera is equipped with a wide-angle lens, the center tends to be brighter while the periphery tends to be darker.

Changing the Image Size (Image Size)

Procedure

Enter the REC Mode * MENU * Image Size

This setting can be used to configure snapshot image size.

Image Size	Suggested Print	Description
	Size and
(Pixels)
	Application
12M (4000x3000)	Poster Print	Good detail for better clarity even for
		images cropped from the original on a
3:2 (4000x2656)	Poster Print
		computer, etc.
10M (3648x2736)	Poster Print	Good detail
5M (2560x1920)	A4 Print
VGA (640x480)		Image files are smaller, which is better
	E Mail	when attaching images to e-mail.
		However, images are relatively coarser.

•The initial factory default image size setting is 12M (12 million pixels).

•Selecting “3:2” records images with an aspect ratio of 3:2, which matches the standard aspect ratio of print paper.

•You should regard the print paper sizes suggested here as guidelines only (200 dpi print resolution).

56 Advanced Recording Settings