Casio Not available When things don’t go right, Troubleshooting

When things don’t go right...

Troubleshooting

	Problem	Possible Cause and Recommended Action
Power Supply
	Power does not	1)The battery of new camera is not charged. Charge the battery
	turn on.	before using the camera.
		2)The camera battery may be dead. Charge the battery (page
		18). If this does not resolve the problem, contact your retailer
		or a CASIO authorized service center.
	The camera	1)The camera is designed to turn off automatically after no
	suddenly powers	operation is performed for about five minutes. Turn power
	down.	back on.
		2)The battery may be dead. Charge the battery (page 18).
		3)The camera’s protection function may have activated
		because camera temperature is too high. Turn off the camera
		and wait until it cools down before trying to use it again.
	Power will not turn	Use a thin object to press the reset button (page 8) near the
	off. Nothing	memory card slot to turn the camera off and then turn on the
	happens when a	camera again. Unlike the reset operation (page 101), pressing
	button is pressed.	the reset button near the memory card slot does not initialize
		camera settings.
Image Recording
	Image is not	1)If the camera is in the PLAY mode, touch “r” (REC) to enter
	recorded when the	the REC mode.
	shutter button is	2)If the message “Memory Full” appears, transfer images to
	pressed.	your computer, delete images you no longer need, or use a
		different memory card.
	Auto Focus does	1)If the lens is dirty, clean it off.
	not focus properly.	2)The subject may not be in the center of the focus frame when
		you compose the image.
		3)You may be moving the camera when shooting. Try shooting
		with the “High Speed Anti Shake” BEST SHOT scene, place
		the camera on a tabletop or some other stable surface, or find
		some way to fix the camera in place.
		4)You may be pressing the shutter button all the way without
		waiting for Auto Focus. Half-press the shutter button and
		allow enough time for Auto Focus to focus.
	The subject is out	The image may not be focused properly. When composing the
	of focus in the	image, make sure the subject is located inside the focus frame.
	recorded image.

116 Appendix