Casio Not available Configuring Camera Sound Settings (Sounds), Time Stamping Snapshots (Timestamp), Off, Date, Volume, Startup, Shutter, Playback, Procedure, Operation, Operation

Configuring Camera Sound Settings (Sounds)

Procedure

MENU * Setup * Sounds

Startup
Half Shutter		Toggles the operation tone between on and off.
Shutter
Operation
	Operation	Specifies the sound volume. This volume setting is also
		used during video output (from the HDMI port) (page 70).
Volume		Specifies the volume of movie audio output. This volume
	Playback	setting is also used during video output (from the HDMI
		port) (page 70).

• Setting a volume level of 0 mutes output.

Time Stamping Snapshots (Timestamp)

Procedure

MENU * Setup * Timestamp

You can configure the camera to stamp the recording date only, or date and time in the lower right corner of each snapshot.

•Once date and time information is stamped into a snapshot, it cannot be edited or deleted.

Example: July 10, 2012, 1:25 p.m.

Date	2012/7/10
Date&Time	2012/7/10 1:25pm
Off	No stamping of date and/or time

•Even if you do not stamp the date and/or time with Timestamp, you can do so later using some printing application.

•Stamping is performed in accordance with the date and time settings (page 98) and the display style settings (page 99).

96 Other Settings (Set Up)