5.Turn on the camera.

The camera monitor screen will shows a remote controller image. The TV screen will show a recorded image.

•The contents of the remote controller image will depend on the type of image that is displayed on the TV screen.

6.Touch the camera monitor screen to perform operations.

NOTE

•Use a HDMI cable with a plug that is compatible with the camera’s HDMI micro connector on one end, and a plug that is compatible with your TV’s HDMI connector on the other end.

•Proper image and/or audio output and other operations may not be possible with some devices.

•Connecting the camera to the HDMI connector of another device can damage both the camera and the other device. Never connect two HDMI output connectors to each other.

•When cables are connected to both the USB port and the HDMI output connector, the HDMI output connector connection is given priority.

•Disconnect the HDMI cable when you are not using HDMI output. The camera’s monitor screen may not operate normally while the HDMI cable is connected.

•Audio is monaural.

•Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required.

•To select the digital signal format, see page 100.

71

Viewing Snapshots and Movies