Casio Not available manual 22

Back Lamp Operation

Lamp Status	Description	Back lamp
Lit Amber	Charging
Lit Red	Charging in progress (Data transfer with
	computer not supported.)
	Abnormal ambient temperature, or battery
Flashing Red	problem (page 109), or charging
	terminated by the timer
	The battery is over-discharged. Battery
Flashing Red and	charging over connection with a computer’s
	USB port cannot be performed for some
Amber	reason. Use the USB-AC adaptor that
	comes with the camera to charge the
	battery.
Lit Green	Charging complete, or charging stopped

5.After charging is complete, disconnect the USB cable from the camera and then from the computer.

NOTE

•Even if you turn off the camera, the battery will continue to charge if there is a USB connection with a computer. Under this condition, the back lamp operates as described under “Back Lamp Operation” (page 19).

IMPORTANT!

•Charging is not performed while the connected computer is in the hibernate mode.

•A charging error can occur immediately after charging begins or some time after charging begins. A charging error is indicated by the back lamp flashing red.

•If low supply capacity exists due to your computer model or connection conditions, charging will start without the camera turning on. Turning on the camera in this case will cause charging to stop and enter USB data communication between the camera and the computer. The camera’s back lamp will be lit green at this time.

22 Quick Start Basics