Casio SE-S6000, SE-C6000 user manual When an error occurs, 122

Troubleshooting

This section describes what to do when you have problems with operation.

When an error occurs

Errors are indicated by an error codes. When this happens, you can usually find out what the problem is as illus- trated below.

Press Cand check the appropriate section of this manual for the operation you want to perform.

Error	Message	Meaning	Action
code
E001	Wrong mode	Mode switch position changed before finalization.	Return the mode switch to its original setting and finalize
			the operation.
E003	Wrong operator	Clerk button pressed before finalization of a registration	Press the original clerk button and finalize the transaction
		being performed under another clerk button.	before pressing another clerk button.
		The signed on clerk differs from the clerk performed the	Input correct check number or assign the proper clerk
		tracking check registration.	number.
E004	Error INIT/FC	Initialization or unit lock clear operation in progress.	Complete operation.
E005	Insufficient memory	Memory allocation exceeds total memory capacity.	Reallocate memory or expand memory (if possible).
E008	Please sign on	Registration without entering a clerk number.	Enter a clerk number.
E009	Enter password	Operation without entering the password.	Enter password.
E016	Change back to REG	Two consecutive transactions attempted in the refund	Switch to another mode and then back to the RF mode for
	mode	mode.	the next transaction.
E017	Enter CHK/TBL	Attempt made to register an item without inputting a	Input a check number.
	number	check number.
E018	Enter Table number	Attempt made to register an item without inputting a table	Input a table number.
		number.
E019	Enter number of	Finalize operation attempted without entering the number	Enter the number of customer.
	customers	of customer.
E021	No DEPT Link	No department linked PLU is registered.	Correct the program.
E023	Stock shortage	Actual stock quantity becomes less than the minimum	Perform stock maintenance.
		stock quantity.
E024	No stock	Actual stock quantity becomes / is negative.	Perform stock maintenance.
E025	Illegal scale read	Scale reading error or Manual entry for scalable item.	Put item on the scale again or do not enter weight by
	or entry		hand.
E026	Enter condiment/	No condiment / preparation PLU is registered.	Register condiment / preparation PLU.
	preparation PLU
E029	In the tender	Item registration is prohibited, while partial tender.	Finalize the transaction.
	operation
E030	Press RATE TAX key	Finalization of a transaction attempted without register-	Register <RATE TAX>.
		ing rate-tax.
E031	Press ST key	Finalization of a transaction attempted without confirm-	Press <SUBTOTAL>.
		ing the subtotal.
E032	Press FSST key	Finalization of a transaction attempted without confirm-	Press <FS/ST>.
		ing of the food stamp subtotal.
E033	Enter tendered	Finalize operation attempted without entering amount	Enter the amount tendered.
	amount	tender.
E035	Change amount	Change amount exceeds preset limit.	Input amount tendered again.
	exceeds limit
E036	Remove money from	Contents of the drawer exceed programmed limit.	Perform pick up operation.
	the drawer
E037	Digit or amount	High amount lock out / low digit lock out error	Enter correct amount.
	limitation over
E038	Perform money	Read / reset operation without declaring cash in drawer.	Perform money declaration.
	declaration	This error appears only when this function is activated.
E040	Issue guest receipt	Attempt to register a new transaction without issuing a	Issue a guest receipt.
		guest receipt.
E041	Print validation	Attempt to register a new transaction without validation.	Perform validation operation.
E042	Insert VLD paper	Validation paper (slip printer) has run out.	Insert new validation paper.
	and retry
E044	Print Cheque	Attempt to register a new transaction without printing check.	Perform check print.
E045	Print Check	Attempt to register a new transaction without printing	Perform check endorsement.
	Endorsement	check endorsement.
E046	REG buffer full	Registration buffer full.	Finalize the transaction.
E047	Print bill	Separate check buffer full.	Allocate sufficient separate check buffer.
E048	Insert slip paper	Attempt to register a new transaction without printing slip.	Perform slip printing operation.
	and retry	No paper is inserted or paper is out in the slip printer.	Insert new slip paper.
E049	CHECK memory full	Check tracking index memory full.	Finalize and close the check number currently used.
E050	DETAIL memory full	Check tracking detail memory full.	Finalize and close the check number currently used.

E

122