Casio SE-C6000, SE-S6000 Appendix, Tax table programming for US tax table, Programming procedure

Appendix

Tax table programming (for US tax table)

Example 1, Without rate tax:

Preparation

TAX	Price range
(6%)	Min. break point	Max. break point
$ .00	$ .01	$ .10
.01	.11	.24
.02	.25	.41
.03	.42	.58
.04	.59	.74
.05	.75	.91
.06	.92	1.08
.07	1.09	1.24

Max. break point				Difference	Pattern
Upper		Lower
10	–	0	=	10	Non-cyclic
24	–	10	=	14
41	–	24	=	17
58	–	41	=	17	Cyclic
74	–	58	=	16
91	–	74	=	17
108	–	91	=	17	Cyclic
124	– 108		=	16
		124	=	17
				17

Tax rate (2-digit for integer + 4- digit for decimal)	0% (Table only)
Tax table maximum value ("0" means unlimited).	0	(Table only)
Rounding/tax table system code	01	(Table only)
Sum of a cyclic pattern	50	(17	+ 17 + 16)
Number of values in each cyclic pattern	3
Number of values in each non-cyclic pattern	24	(10	+ 14)
Actual value of difference of the non-cyclic and cyclic values	10, 14, 17, 17, 16

Programming procedure:

REG2X1

REG1 Z1

OFF	X2/Z2
RF
PGM	PGM

Mode Switch

Tax table 1 =0125

Tax table 2 =0225

Tax table 3 =0325

Tax rate (2-digit for integer + 4-digit for decimal)

Tax table maximum value (“0” means unlimited).

Appendix

Rounding/tax table system code

Sum of a cyclic pattern

Number of values in each cyclic pattern

Number of values in each non-cyclic pattern

Actual value of difference of the non-cyclic and cyclic values

You must enter these values in 4-digit block. If the last block comes out to be only two digits, add two zeros.

129

E