Basic Operations

NOTE

•Pressing the PIANO SETTING button while a rhythm is playing stops rhythm play and then changes the keyboard setup.

•Pressing the PIANO SETTING button while the keyboard is in the Synthesizer Mode or other mode exits the current mode and then changes the keyboard setup.

•The setup of the keyboard does not change if you press the PIANO SETTING button when any one of the following exists.

*During real-time recording, step recording, or while using the editing function of the Song Memory

*While the data save or overwrite message is on the display

*During demo tune play

Using the PITCH BEND Wheel

As its name suggests, the PITCH BEND wheel lets you “bend” the pitch of a sound. This makes it possible to add a touch of realism to saxophone and other tones.

To use the PITCH BEND wheel

1While holding down a keyboard key with your right hand, use your left hand to rotate the PITCH BEND wheel up and down.

•Releasing the PITCH BEND wheel returns the note to its original pitch.

NOTE

•With saxophone and electrical guitar tones, the most realistic sounding effects can be produced if you play notes and operate the PITCH BEND wheel simultaneously.

•See “Pitch Bend Range (Initial Default: 12)” on page E-73 for changing the bend range of the PITCH BEND wheel.

•Never turn on keyboard power while the PITCH BEND wheel is rotated.

Using the MODULATION

Modulation applies vibrato, which modulates the pitch of a note. It works best with notes that are sustained (held) by keeping a keyboard key held down, especially when playing the melody with a violin or other similar tone.

You can modify the modulation effect using DSP parameter 0 through 7. For more information, see “DSP Parameters” on page E-28.

•WK-3700

To use the MODULATION Wheel

1While playing melody notes with your right hand, rotate the MODULATION wheel with your left hand to apply vibrato to the notes.

•The amount of vibrato applied depends on how far you rotate the MODULATION wheel upwards. Setting the wheel to its neutral position (rotated as far downwards as it can go) turns vibrato off.

•WK-3200

To use the MODULATION button

1While holding down a keyboard key with your right hand, use your left hand to press the MODULATION button.

•Vibrato is applied as long as the MODULATION button is depressed.

NOTE

•Modulation can be used to add greater expression to sustained melody notes being played using a violin, synthetic reed, or other similar tone.

•Modulation affects different tones in different ways.

738A-E-023A

E-21