Saving Data

PREPARATION

•SmartMedia Card

•Insert the SmartMedia card that contains the data you want to load into the keyboard’s card slot.

•Floppy Diskette (WK-3700 Only)

•Insert the floppy diskette that contains the data you want to load into the keyboard’s floppy disk drive.

NOTE

•Depending on the type and the amount of data involved, a SmartMedia card or floppy diskette (WK-3700 only) data save or load operation can take anywhere from a few minutes to more than 10 minutes to complete. The message “Pls Wait” will remain on the display to indicate that a data save or load operation is being performed.

IMPORTANT!

•Never try to perform any operation while “Pls Wait” is displayed. Performing any operation can cause Flash memory or SmartMedia card or floppy diskette data to be deleted, and damage the keyboard’s memory and cause it to malfunction.

To recall file data from external storage media

1What you should do first depends on the type of external storage media you are using.

•SmartMedia Card

On the WK-3700 press the DISK/CARD button twice. On the WK-3200, press the CARD button once.

•This causes a pointer to appear next to the DISK/ CARD or CARD on the display, and also displays “Card” in the display’s text area.

•Floppy Diskette (WK-3700 Only) Press the DISK/CARD button.

•This causes a pointer to appear next to the DISK/ CARD on the display, and also displays “Disk” in the display’s text area.

NOTE

•After pressing the DISK/CARD button (WK-3200: CARD button) once, you can use the [￿] and [￿] CURSOR buttons to select the external storage media.

2Press the [￿] CURSOR button to display the Card Mode (or Disk Mode) menu.3Use the [￿] and [￿] CURSOR buttons to display the “Load” screen.4Press the [￿] CURSOR button to advance to the file type selection screen.
5Use the [￿] and [￿] CURSOR buttons to select the type file you want to load.6Press the [￿] CURSOR button to display the file name selection screen.

7Use the [￿] and [￿] CURSOR buttons or [+] and [–] buttons to select the name of the file you want to load.

•You could also use the number buttons to input a three-digit file number. The file number is shown in the number area of the display.

8Press the [￿] CURSOR button to advance to the user area selection screen.

9Use the [￿] and [￿] CURSOR buttons or [+] and [–] buttons to select the user area to which you want to import the loaded file data.

•The numeric area of the display will show the user area number, while the text area will show the user area name*.

* Except registrations and user songs

•The user area selection screen will not appear if the file you selected is a package file or “All Data” file. In this case, skip step 9 and go directly to step 10.

•Pressing the EXIT or [￿] CURSOR button at this time will return you to the file type selection screen.

0After selecting the user area, press the [￿] CURSOR button.

•This will display a confirmation message asking whether you really want to load the data. If you already have data in the user area, the message will ask if you want to overwrite the existing data with the loaded data.

APress the YES button to recall the data.

•This will cause the message “Pls Wait” to appear on the display to indicate that a card access operation is being performed. Never try to perform any other operation on the keyboard while the card is being accessed. The message “Complete” will appear on the display after data loading is complete. After a few seconds, the message will be replaced by the file name selection screen.

•If you do not want to continue with data loading, press the EXIT button or the NO button in response to the above confirmation message. This will return you to the user area selection screen in step 9.

BAfter you are finished performing the load operation, press the DISK/CARD button (CARD button on the WK-3200) to exit the Card Mode.

738A-E-091A

E-89