Casio WK3200, WK3700 Editing Memory Contents, To edit memory contents, etc, mode, • Notes, details, • Chords, a recording, • Tone numbers, • Rhythm number, • Note intensity

Song Memory Function

Editing Memory Contents					4 Use the [￿] and [￿] CURSOR buttons to move to
After you record to keyboard memory, you can recall						the location in track where the note or parameter
						you want to change is located.
individual notes and parameter settings (such as tone
number) and make any changes you want. This means you						Note editing example
can correct misplayed notes, make changes in tone selections,
							Velocity		Pitch
etc.
The following types of data can be edited.
								N o t e	C 4
• Note intensity
• Notes
• Chords
• Tone numbers
• Rhythm number
• INTRO/ENDING 1 button, INTRO/ENDING 2 button,					5 Make any changes in the value that you want.
	VARIATION/FILL-IN 1 button, VARIATION/FILL-IN 2
	button, SYNCHRO/FILL-IN NEXT button operations					• The actual procedures you use to change a parameter
						depend on the type of data it contains. See “Editing
		To edit memory contents				Techniques and Display Contents” on page E-63 for
						details.
1 Press the SONG MEMORY button three times to					6 Repeat steps 4 and 5 to edit other parameters.
		enter step recording standby, and then use the [+]			7 Press the START/STOP button to end editing when
		and [–] buttons to select a song number (0 to 4).				you are finished.
				Flash
					NOTE
		S t e p	R e c		•	The only parameters that can be editted for Tracks 2
						through 6 are notes and tone numbers.
					•	In the case of real-time recording, you later can change
						tone numbers you specified while recording to Tracks 1
2 Use the SONG MEMORY TRACK buttons to select						through 6 is in progress.
					•	You can only change tone numbers that were originally
		the recorded track that you want to edit.				set for Tracks 2 through 6 using step recording.
					•	In the case of real-time recording, you later can change
3 Press the [￿] CURSOR button to enter the editing						rhythm numbers you specified while recording to Track
						1 is in progress.
		mode.
					• You can only change rhythm numbers that were originally
		• The REC indicator disappears from the display, and
						set for Track 1 using step recording.
		the STEP indicator flashes.
					• You cannot use the edit procedure to add more data to
						a recording.
					•	You cannot move portions of a recording to a different
						location within the recording.
					• Note lengths cannot be changed.

E-62 738A-E-064A