Using the SMF Player
SMF PLAYER
ACCOMP VOLUME
START/STOP
Playing Back an SMF
Note that the first step you need to perform in the procedure below depends on whether you are playing back from Flash memory, a SmartMedia card, or a floppy diskette
PREPARATION
•SmartMedia Card
•Insert the SmartMedia card that contains the data you want to play into the keyboard’s card slot.
•Floppy Diskette
•Insert the floppy diskette that contains the data you want to play into the keyboard’s floppy disk drive.
IMPORTANT!
•Never remove the SmartMedia card from the card slot or turn off the keyboard while card data is being accessed by a save, read, or delete operation. Doing so can corrupt the data on the SmartMedia card or even damage the card slot.
•Before ejecting a diskette, always check to make sure that the access lamp is not lit or flashing. A lit or flashing access lamp means that the keyboard is performing a data read or write operation. Ejecting a diskette while it is being accessed can cause its data to become corrupted.
CHANNELCURSOR
Number buttons
EXIT
To play back an SMF
1What you should do first depends on whether you are playing back from Flash memory, a memory card, or a floppy diskette.
Flash Memory•This causes the “SMF PLAYER” indicator to appear on the display.
I n t e r n a l
•After pressing the SMF PLAYER button, you can use the [] and [] CURSOR buttons to select the external storage media.
SmartMedia Card•This causes the “SMF PLAYER” indicator to appear on the display.
•After pressing the SMF PLAYER button, you can use the [] and [] CURSOR buttons to select the external storage media.
Floppy Diskette•This causes the “SMF PLAYER” indicator to appear on the display.
•After pressing the SMF PLAYER button, you can use the [] and [] CURSOR buttons to select the external storage media.