Using the Drawbar Organ Mode

Display Contents in the Drawbar Organ Mode

In the Drawbar Organ Mode, the current status of the drawbar positions, key click, and percussion parameters are indicated on the display’s bar graph as shown in the illustrations below. There is one line for each parameter, and the bottom segment of the selected parameter line flashes.

The bottom segment of the bar graph column that represents the currently selected parameter flashes to indicate that it is selected.

None of the channel numbers (1 to 16) are displayed in the drawbar organ tone mode and editing mode.

Drawbar Position Graph

Setting Value

0

1

2

3

Display

Off

On

Blink

Click and Percussion On/Off Graph

Setting Value

 

Off

 

 

On

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

Percussion Decay Time Graph

Setting Value

 

0-31

32-63

64-95

96-127

Display

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To save an edited drawbar organ tone

1After editing parameters, use the [￿] and [￿] CURSOR buttons to display “More?”.

2Press the [￿] CURSOR button three times to display the screen for inputting a tone name and assigning a tone number.

3Use the [+] and [–] buttons or the number buttons to select a tone number.

•You can select a tone number in the range of 100 to 199.

4After the tone name is the way you want, press the [￿] CURSOR button to store the tone.

•Use the [+] and [–] buttons to scroll through letters at the current cursor location.

•Use the [￿] and [￿] CURSOR buttons to move the cursor left and right.

•See the page E-92 for information about inputting text.

5After everything is the way you want, press the [￿] CURSOR button to store the tone.

•This will display a confirmation message asking whether you really want to save the data. Press the YES button to save the data.

•After the save operation is complete, the message “Complete” appears and then the display returns to the tone selection screen.

•To cancel save, press the EXIT button.

E-26

738A-E-028A