Casio WK3200, WK3700 T i me, Selecting CHORUS, Changing the Settings of REVERB, REVERB Parameters, Parameters, ■ ER Level, ■ High Damp, Delay Type (No. 6, 7, 14, 15)

738A-E-032A

Applying Effects to Tones

4 Use the [+] and [–] buttons or the number buttons			■ High Damp (Range: 000 to 127)
to scroll through the reverb types until the one you			Adjusts the damping of high frequency reverberation
want is displayed, or use the number buttons to			(high sound). A smaller value damps high sounds,
input the reverb number you want to select.			creating a dark reverb. A larger value does not damp high
			sounds, for a brighter reverb.
• See the list on page A-14 for information about the
	types of REVERB effects that are available.		Delay Type (No. 6, 7, 14, 15)
• Here you could also change the parameters of the
			■ Delay Level (Range: 000 to 127)
	effect you selected, if you want. See “Changing the
			Specifies the size of the delay sound. A higher value
	Settings of REVERB Parameters” for more
	information.		produces a larger delay sound.
Changing the Settings of REVERB			■ Delay Feedback (Range: 000 to 127)
			Adjusts delay repeat. A higher value produces a greater
Parameters
			number of repeats.
You can control the relative strength of a reverb and how it is
applied. See the following section titled “REVERB			■ ER Level
Parameters” for more information.			Same as Reverb Type
1 After selecting the reverb type you want, use the			■ High Damp
[￿] and [￿] CURSOR buttons to display the
			Same as Reverb Type
parameter whose setting you want to change.
• This displays the parameter setting screen.			NOTE
Example: To set the Reverb Time parameter			• Whether or not an effect is applied to the parts that are
			sounding also depends on Mixer Mode Reverb Send,
	SR v	T i me
			Chorus Send, and DSP on/off settings. See “Mixer
			Function” on page E-40 for more information.
2 Use the [+] and [–] buttons or the number buttons
to input the parameter setting you want.			Selecting CHORUS
3 Press the EFFECT or EXIT button.			Perform the following steps to select CHORUS.
• This returns to the tone or rhythm selection screen.			1 Press the EFFECT button, so the pointer appears
			next to EFFECT on the display screen.
REVERB Parameters			2 Press the [￿] CURSOR button twice.
Reverb effects are associated with either a reverb type or delay			• This displays the chorus editing screen.
type. Parameter settings depend upon the associated type.			• The chorus type setting screen (step 4) will appear
			automatically about fives seconds after you press the
Reverb Type (No. 0 to 5, 8 to 13)			button.
■ Reverb Level (Range: 000 to 127)			3 Press the [￿] CURSOR button.
Controls the reverb size. A larger number produces larger
reverb.			4 Use the [+] and [–] buttons or the number buttons
■ Reverb Time (Range: 000 to 127)			to scroll through the chorus types until the one you
Controls how long reverb continues. A larger number			want is displayed, or use the number buttons to
			input the chorus number you want to select.
produces longer reverb.
			• See the list on page A-14 for information about the
■ ER Level (Initial Echo Sound) (Range: 000 to 127)			types of CHORUS effects that are available.
This parameter controls the initial reverb volume. The			• Here you could also change the parameters of the
			effect you selected, if you want. See “Changing the
initial echo sound is the first sound reflected from the
			Settings of CHORUS Parameters” for more
walls and ceiling when a sound is output by this keyboard.
			information.
A larger value specifies a larger echo sound.

E-30