Synthesizer Mode

■Modulation Assign (Range: *)

The Modulation Assign parameter specifies which parameters should be affected when you use the keyboard’s modulation function. Select “oFF” for any parameters that you do not want affected by the modulation function.

Mo d u l a t .

*

ValueMeaning

oFF

Off

 

 

vib

Control Change 01h (Modulation)

 

 

dp0

Control Change 16

 

(Normally assigned to DSP Parameter 0.)

 

 

dp1

Control Change 17

 

(Normally assigned to DSP Parameter 1.)

 

 

dp2

Control Change 18

 

(Normally assigned to DSP Parameter 2.)

 

 

dp3

Control Change 19

 

(Normally assigned to DSP Parameter 3.)

 

 

dp4

Control Change 80

 

(Normally assigned to DSP Parameter 4.)

 

 

dp5

Control Change 81

 

(Normally assigned to DSP Parameter 5.)

 

 

dp6

Control Change 82

 

(Normally assigned to DSP Parameter 6.)

 

 

dp7

Control Change 83

 

(Normally assigned to DSP Parameter 7.)

 

 

NOTE

•If the Modulation Assign setting of a tone is any setting from dp0 through dp7, that setting is ignored when the tone is used as a layered or split tone. DSP parameter effects are applied to the main tone only.

■Modulation Depth (Range: 0 to 127) (WK-3200 only)

On the WK-3200, this parameter controls the modulation value when the MODULATION button is pressed. How the MODULATION button functions depends on the modulation assign parameter setting as described below.

If this setting is

 

selected for

Modulation is applied like this:

modulation assign:

 

 

Modulation is applied to the depth specified

 

by the value assigned to the Modulation

 

Depth parameter as long as the

vib

MODULATION button is depressed.

 

Releasing the MODULATION button causes

 

the modulation value to return to the initial

 

default value for the tone being used.

 

 

 

Each press of the MODULATION button

 

toggles modulation between the value

dp0 through dp7

assigned to the Modulation Depth Parameter

 

and the initial default value for the tone being

 

used.

Mo d D e p t h

MODULATION Button Lamp

The MODULATION button lamp lights when the current modulation depth is at its greatest possible setting. This can occur either when the MODULATION button is depressed or released, depending on the current Modulation Depth parameter setting and the initial default modulation depth value of the tone you are currently using.

E-48

738A-E-050A