Casio WK3200, WK3700 Recording Multiple Tracks, Track Contents After Real-time, To record to Tracks 2 through 6 using, real-timerecording, step recording

			Song Memory Function
IMPORTANT!	4 Press the START/STOP button to start recording.
• The length of the ending depends on the rhythm you		• At this time, the contents of any tracks that are already
are using. Check the length of the pattern you are using			recorded start to play back.
and set the length of the chord accordingly in step 6.		• Optional pedal, pitch bend and modulation
Making the chord too short in step 6 can result in the			operations are also recorded.
ending pattern being cut off.	5 Use the keyboard to play what you want to record
To step record chords without rhythm		the track you selected.
Skip step 4. The specified chord of the length specified by	6 Press the START/STOP button to end recording
the number buttons is recorded. A rest can be specified here,
so an original chord pattern can be created.		when you are finished.
To add chord accompaniment part way through rhythm	Track Contents After Real-time
play
	Recording
In place of step 4 at the start of the recording, press
VARIATION/FILL-IN 1 or VARIATION/FILL-IN 2 button	In addition to keyboard notes, the following data is also
and input rests. Then in step 5, input the chords. Only rhythm	recorded to the selected track during real-time recording. This
is played where you input the rests, and then chord play starts	data is applied whenever the track is played back.
after the rests.	• Tone number
Recording Multiple Tracks	• Pedal operations (option)
	The following data is recorded in the header whenever you
Track 1 of the keyboard’s song memory records Auto
	start a recording of a track.
Accompaniment and keyboard play. In addition, there are
	• Mixer settings of other tracks
five other melody tracks that you can use to record melody
parts only. You can record different tones to the melody tracks	• Effect type
and build a full ensemble of instruments for your recordings.	• Accompaniment volume
The procedure you use for recording to Tracks 2 through 6 is	• Reverb Level
identical to the one you use when recording to Track 1.	• Chorus Level
	• DSP Hold On/Off
	• Mixer Hold On/Off
To record to Tracks 2 through 6 using	• Pitch bend wheel operation
real-time recording	• Modulation wheel operation (WK-3700)
	• Modulation button operation (WK-3200)
You can record to Tracks 2 through 6 while playing back what	• Pitch bend range
you originally recorded on Track 1 and any other tracks that
are already recorded.	To record to Tracks 2 through 6 using
1 Press the SONG MEMORY button twice to enter	step recording
record standby, and then use the number buttons	This procedure describes how to input notes one-by-one,
to select a song number (0 to 4).	specifying each note’s pitch and length.
• The song number you select should be the one where	1 Press the SONG MEMORY button three times to
you previously input Track 1.		enter real-time record standby,		and then use the
2 Use the SONG MEMORY TRACK buttons to select
		number buttons to select a song number (0 to 4).
the track you want to record to (2 through 6).		• The song number you select should be the one where
• While the keyboard is in record standby, the display			you previously input Track 1.
shows the level meters for channels 11 through 16, so
you can check which tracks have already been			S t e p	R e c
recorded. See “Level Meter Contents During Record/
Edit Standby” on page E-60 for details.
3 Make the following settings.
• Tone number
• Tempo
738A-E-061A					E-59