Casio WK3000, WK3100, WK3500 Loading a File, Mode, button, the “Load” screen, name selection screen, Mode (or Disk Mode) menu, file type selection screen, type file you want to load

						Saving Data
	9 After inputting the file name, press the [￿] CURSOR		PREPARATION
	button.		•	SmartMedia Card
	• If you are saving song data, the file type selection			• Insert the SmartMedia card that contains the data you
	screen appears next. Use the [￿] and [￿] CURSOR			want to load into the keyboard’s card slot.
	buttons to select “SMF” or “SONG”. After selecting a		•	Floppy Diskette (WK-3500 Only)
	file type, press the [￿] CURSOR button.			• Insert the floppy diskette that contains the data you
	• This will display a confirmation message asking			want to load into the keyboard’s floppy disk drive.
	whether you really want to save the data. If you
	already have data in the user area, the message will		NOTE
	ask if you want to overwrite the existing data with
			•	Depending on the type and the amount of data involved,
	the loaded data.
				a SmartMedia card or floppy diskette (WK-3500 only)
	0 Press the YES button to save the data. This will cause			data save or load operation can take anywhere from a
	the message “Pls Wait” to appear on the display to			few minutes to more than 10 minutes to complete. The
				message “Pls Wait” will remain on the display to indicate
	indicate that a card access operation is being
				that a data save or load operation is being performed.
	performed. Never try to perform any other operation
	on the keyboard while the card is being accessed. The		IMPORTANT!
	message “Complete” will appear on the display after
			•	Never try to perform any operation while “Pls Wait” is
	data save is complete. After a few seconds, the message
				displayed. Performing any operation can cause Flash
	will be replaced by the file name selection screen.			memory or SmartMedia card or floppy diskette data to
	• If you do not want to continue with data save, press			be deleted, and damage the keyboard’s memory and
	the EXIT button or the NO button in response to the			cause it to malfunction.
	above confirmation message. This will return you to
	the user area selection screen in step 7.		To recall file data from external storage media
	A After you are finished performing the save		1 What you should do first depends on the type of
	operation, press the DISK/CARD button (CARD			external storage media you are using.
	button on the WK-3100/WK-3000) to exit the Card
				• SmartMedia Card
	Mode.			On the WK-3500 press the DISK/CARD button twice. On
				the WK-3100/WK-3000, press the CARD button once.
				• This causes a pointer to appear next to the DISK/
	Loading a File				CARD or CARD on the display, and also displays
					“Card” in the display’s text area.
	Use the procedures in this section when you want to load data			• Floppy Diskette (WK-3500 Only)
				Press the DISK/CARD button.
	from external storage media into the keyboard’s user area.
				• This causes a pointer to appear next to the DISK/
	IMPORTANT!				CARD on the display, and also displays “Disk” in
					the display’s text area.
	• Note the following important points whenever using the SMF
			2 Press the [￿] CURSOR button to display the Card
	Player Mode to play back data saved with the above procedure.
	* SmartMedia Card			Mode (or Disk Mode) menu.
			3 Use the [￿] and [￿] CURSOR buttons to display
	To perform the procedure below, you must have a
	SmartMedia card to which SMF data has been copied from			the “Load” screen.
	a computer. Insert a SmartMedia card that you have
	formatted on the keyboard into the card slot of your		4 Press the [￿] CURSOR button to advance to the
	computer, and copy the SMF data you want to load into			file type selection screen.
	the directory named “CASIO_MD”. Note that you will not
	be able to load the data if it is not located inside the		5 Use the [￿] and [￿] CURSOR buttons to select the
	“CASIO_MD” directory. If you create a sub-directory inside
	of the “CASIO_MD” directory, the keyboard will not be			type file you want to load.
	able to load any data inside the sub-directory.		6 Press the [￿] CURSOR button to display the file
	* Floppy Diskette (WK-3500 only)
	This keyboard is able to see only files that are in the top			name selection screen.
	(root) directory of the floppy diskette. It will not be able to		7 Use the [￿] and [￿] CURSOR buttons or [+] and [–]
	see any files that are located in a subdirectory.
				buttons to select the name of the file you want to load.
	735A-E-101C						E-99
WK3100_e_89-105.p65		99			04.3.26, 0:12 PM