Casio WK3000, WK3100, WK3500 Parameter Details, Drawbar Position, Click, Percussion, Settings, Settings, Settings, Indication, Using the Drawbar Organ Mode

Using the Drawbar Organ Mode

Editing Synthesizer Mode Parameters and DSP Parameters of Drawbar Tones

As with standard (non-drawbar) tones, you can edit the Synthesizer Mode parameters and DSP parameters of drawbar organ tones. See “Drawbar Organ Mode Operational Flow” on page E-26.

1Use the [] and [] CURSOR buttons to display “More?”, and then press the [] CURSOR button.

•This enters the Synthesizer Mode, which is indicated by the indicator next to SYNTH on the display screen.

•For the remainder of this procedure, perform the steps starting from step 3 under “Creating a User Tone” on page E-54.

Parameter Details

The following provides details about the parameters you can configure using the drawbar organ tone editing screen.

Drawbar Position

This parameter defines the position of each drawbar, and the volume of each overtone. The larger the value, the greater the corresponding overtone’s volume.

Parameter Name	Parameter Display	Settings
	Indication
Drawbar 16’	Ft 16’	0 to 3

Drawbar 5 1/3’	Ft 5 1/3’	0 to 3

Drawbar 8’	Ft 8’	0 to 3

Drawbar 4’	Ft 4’	0 to 3
Drawbar 2 2/3’	Ft 2 2/3’	0 to 3
Drawbar 2’	Ft 2’	0 to 3
Drawbar 1 3/5’	Ft 1 3/5’	0 to 3

Drawbar 1 1/3’	Ft 1 1/3’	0 to 3

Drawbar 1’	Ft 1’	0 to 3

(Ft: Feet)

Click

The parameter determines whether or not a key click is added when a sustained tone configured using the drawbars is played.

Parameter Name	Parameter Display	Settings
	Indication
Click	Click	oFF .... Click Off
Click	Click	on ....... Click On
		on ....... Click On

Percussion

This parameter lets you add percussion sound, which provides modulation to sustained tones that you create. When you hold down a key on the keyboard, the sound produced decays until it is no longer audible. Pressing the key again sounds the note again at a louder volume. Percussion has “2nd Percussion” (2nd overtone pitch) and “3rd Percussion” (3rd overtone pitch) settings, each of which can be turned on or off.

You can also specify the percussion decay time, which controls how long it takes for the percussion sound to decay.

Parameter Name	Parameter Display	Settings
	Indication
2nd Percussion	Second	oFF .... Click Off
2nd Percussion	Second	on ....... Click On
		on ....... Click On
3rd Percussion	Third	oFF .... Off
3rd Percussion	Third	on ....... On
		on ....... On
Percussion	Decay	000 to 127
Decay Time	Decay	000 to 127
Decay Time

735A-E-031B		E-29
WK3000_e_26-37.p65	29	04.3.26, 0:10 PM