Troubleshooting

Problem

 

Possible Cause

 

 

Action

See page

 

 

 

 

 

 

 

The keyboard

starts

up

Flash memory is corrupted. There

1.

Remove the batteries from the

E-83

abnormally when it is turned

is something wrong with the card.

 

keyboard and disconnect the AC

 

on.

 

 

 

 

adaptor and press the POWER

 

 

 

 

 

 

button.

 

 

 

 

 

 

 

2.

Reload

the batteries and/or

 

 

 

 

 

 

reconnect the AC adaptor, and

 

 

 

 

 

 

then press the POWER button

 

 

 

 

 

 

again to turn on power.

 

 

 

 

 

3. Use

the

TRANSPOSE/

 

 

 

 

 

 

FUNCTION button to perform

 

 

 

 

 

 

the system reset operation.

 

 

 

 

 

 

• If this does not solve the

 

 

 

 

 

 

problem, contact your nearest

 

 

 

 

 

 

authorized

CASIO Service

 

 

 

 

 

 

Provider to request repair.

 

A downloaded

tone

with

Someone may have turned off the

Use the TRANSPOSE/FUNCTION

E-83

waveform contains noise or

keyboard while data was being

button to perform the system reset

 

keyboard operations become

stored in Flash memory or

operation. If this does not correct

 

abnormal when user data is

something else has caused Flash

the problem, contact your nearest

 

selected.

 

 

memory contents to become

authorized CASIO Service Provider

 

 

 

 

corrupted for some reason.

to request maintenance.

 

Cannot save data to a card.

1. The card is write-protected.

1. Remove the write-protect sticker

E-93

 

 

 

 

 

from the card.

 

E-94

 

 

 

2. The card is not inserted correctly

2. Correctly insert the card into the

 

 

 

into the card slot.

 

card slot.

 

E-101

 

 

 

3. There is not enough space left on

3. Use a different card or delete files

 

 

 

the card.

 

you no longer need from the card

 

 

 

 

 

 

you are using.

 

E-93

 

 

 

4. You are trying to use a card whose

4. Use only a card of the voltage

 

 

 

voltage or capacity is not

 

and capacity specified for this

 

 

 

 

supported by this keyboard.

 

keyboard.

 

 

 

 

 

5. The card is damaged.

5. Use a different card.

 

Cannot recall data from a card.

1. The card is not inserted correctly

1. Correctly insert the card into the

E-94

 

 

 

into the card slot.

 

card slot.

 

E-83

 

 

 

2. There is not enough space

2. Delete rhythm, SMF, or tone with

 

 

 

available in the area into which

 

wave data currently in the

 

 

 

 

you are trying to import the data.

 

keyboard’s Flash memory to

 

 

 

 

 

 

make room from the imported

 

 

 

 

 

 

data.

 

 

E-93

 

 

 

3. You are trying to use a card whose

3. Use only a card of the voltage

 

 

 

voltage or capacity is not

 

and capacity specified for this

 

 

 

 

supported by this keyboard.

 

keyboard.

 

 

 

 

 

4. The card is damaged.

4. Use a different card.

 

Static noise when a microphone

1. Use of a microphone that is

1. Use a full metal shielded Cannon

E-21

is connected.

 

 

different from the type that is

 

type microphone.

 

(WK-3100 only)

 

 

recommended.

 

 

 

 

E-21

 

 

 

2. Use of the microphone in the

2. Move the microphone away from

 

 

 

vicinity of fluorescent lighting.

 

source of the static.

 

No microphone sound

 

1. Microphone volume setting is too

1. Increase the microphone volume

E-21

(WK-3100 only)

 

 

low.

 

setting.

 

 

E-21

 

 

 

2. Microphone’s on/off switch is set

2. Change the microphone’s on/off

 

 

 

to OFF.

 

switch setting to ON.

 

 

 

 

 

 

 

 

 

 

E-108

 

735A-E-110C

WK3100_e_106-112.p65

108

04.3.26, 0:12 PM