Casio WK3000, WK3100, WK3500 Saving Data, Type, Display, File Name, Indicator, Data Type, User Area, Saved Data, User Memory, Savable File Types, Package File Data Contents

Saving Data

You can save data you create and data you transfer to the keyboard from a computer to the keyboard’s built-in Flash memory, or to a SmartMedia cardTM or floppy diskette (WK-3500). In this manual, SmartMedia cards and floppy diskettes are referred to as “external storage media”.

The types of files that can be saved to external storage media are listed below. Note that each type of file can be saved to a specific, pre-defined user area, as shown in the “Savable File Types” table below.

After you load SMF data from external storage media and store it in a user area, you can play it back using the SMF Player Mode. See “Using the SMF Player” on page E-84 for more information.

Savable File Types

Type	Display		Saved Data	User Memory	File Name
	Indicator			Capacity	Extension
SMF	Smf	1 Tune		200	MID
Rhythm Pattern	Pattern	1	Pattern	16	Z00
Registration	Regist	1	Bank	8	Z01
User song created in the Song Memory Mode	Song	1 Tune		5	Z02
Drum sound with waves	Dr wave	1 Set		4	Z03
Drawbar organ tone	Drawbar	1 Tone		100	Z04
Tone	Tone	1 Tone		100	Z05
Tone with waves	Tn wave	1 Tone		20	Z06
DSP	Dsp	1 Type		100	Z07
Package File*1	Package	1	Pack	1	Z08
All User Data*2			All Data		Z09

*1: Package File

A package file combines tone settings, DSP effect settings, and other setup data into a single file that you can manage and load as a unit (package). Once you create a package file, you will be able to change the entire setup of the keyboard by loading a single package file.

To create a package file, you need to download special package file software from the CASIO Music Site (http://music.casio.com/) and install it on your computer. For details about the package file software, see the information provided at the CASIO Music Site.

IMPORTANT!

•Loading a package file loads the setting data listed in the table under “Package File Data Contents” into the user area, and replaces all current data with the data in the package file.

•When loading package data from a SmartMedia card or floppy diskette (WK-3500 only), the display’s level meter shows the progress of the load operation as shown below.

[Load Start] [Load End]

*2: SmartMedia card only

Package File Data Contents

	Data Type		User Area
	SMF		10 Songs
	Rhythm Patterns		148 to 155 (8 rhythms)
	Registrations		7 to 8 (2 banks)
	Drum Sound With Waves		803 (1 set)
	Drawbar Organ Tones		190 to 199 (10 tones)
	Tones		690 to 699	(10 tones)
	Tones With Waves		710 to 719	(10 tones)
	DSP		190 to 199	(10 effects)
	E-92				735A-E-094B
WK3100_e_89-105.p65		92			04.3.26, 0:11 PM