Saving Data

Inserting and Removing a

SmartMedia Card

The following describes how to insert a SmartMedia card into the card slot and how to remove it.

To insert a SmartMedia card into the card slot

With the contact side of the SmartMedia card facing downwards, insert the card into the card slot. Carefully push the card into the slot as far as it will go.

To remove a SmartMedia card from the slot

After making sure that the data access lamp is not lit and the message “Pls Wait” is not on the display, carefully pull the card from the slot.*

*Never remove the SmartMedia card from the card slot or turn off the keyboard card while any of the following conditions exists.

•While the keyboard is in the SMF Player Mode and there is a pointer next to CARD on the display

•While the data access lamp is lit and the message “Pls Wait” is on the display, indicating that a card access operation is being performed

IMPORTANT!

•Never remove the SmartMedia card from the card slot or turn off the keyboard while card data is being accessed by a save, read, or delete operation. Doing so can corrupt the data on the SmartMedia card or even damage the card slot.

Using the Floppy Disk Drive (WK-3500 Only)

Floppy Disk Drive Features

The WK-3500 comes with a built-in disk drive, which provides you with the capabilities described below.

•You can save song memory and synthesizer data on a floppy diskette for long-term storage. When you need the data again, simply insert the diskette into the disk drive and load it.

•You can play back SMF (standard MIDI file) data created on a personal computer and saved to diskette.

Floppy Diskette Precautions

IMPORTANT!

•Avoid the following locations when storing and using diskettes. Any of the conditions noted below can cause data stored on the diskette to become corrupted.

•Near TVs, on top of audio equipment, or in any area exposed to magnetism. Take special care to keep diskettes away from any source of magnetism.

•Areas exposed to direct sunlight, or subject to high humidity or temperature extremes.

•Failure to observe any of the following precautions can cause data stored on the diskette to become corrupted.

•Never try to take a diskette apart.

•Never open the shutter of the diskette or touch the film inside with your fingers.

•Never bend a diskette or otherwise subject it to rough handling.

•Affix labels in the spaces provided only, and do not affix labels on top of previous ones.

•Do not eject the diskette from the drive while the access lamp is lit or flashing or turn off keyboard power with a diskette in the drive. Doing either can cause data on the diskette to become corrupted and can even cause malfunction of the disk drive.

•Never insert any foreign objects into the disk drive. Doing so can cause it to malfunction.

•The disk drive uses a magnetic head. A dirty head cannot read data from a diskette properly and can corrupt existing data on the diskette. To avoid this, be sure to use a commercially available head cleaning diskette to periodically clean the head.

E-94

 

735A-E-096A

WK3100_e_89-105.p65

94

04.3.26, 0:11 PM