Casio WK3000, WK3100, WK3500 DS P, DS P L e v e l, DSPP a n, Effect Parameters, DSP Part Parameters

Mixer Function

Effect Parameters	■ DSP System Reverb Send (Range: 000 to 127)
	This parameter adjusts how much reverb is applied to all
The Mixer lets you control the effects applied to each
	parts.
individual part, making it different from the Effect Mode,
whose settings are applied to all parts in general.
		D . R v b S n d
■ Reverb Send (Range: 000 to 127)
This parameter controls how much reverb is applied to a part.	■ DSP System Chorus Send (Range: 000 to 127)
A setting of “000” turns reverb off, while a setting of 127
applies maximum reverb.	This parameter adjusts chorus.

•“Reverb Send” does not work with some drum sounds.

					D . C h o S n d
	R v b	S e n d
			NOTE
■ Chorus Send (Range: 000 to 127)
			•	Changing the tone, volume, pan pot, coarse tune, fine
This parameter controls how much chorus send is applied to
				tune, reverb send, or chorus send setting causes the
a part. A setting “000” turns chorus send off, while a setting				corresponding MIDI message to be output from the MIDI
of 127 applies maximum chorus send.				terminal.
• “Chorus Send” does not work with drum sounds.			•	Changing the tone settings changes the tone, octave
				shift, reverb send, chorus send, and DSP line* parameter
	C h o	S e n d		settings.
				* When DSP is off (See the note on page E-82).
			• Turning on the Mixer’s DSP Line parameter (on this
■ DSP Line (Settings: on, oFF)				page) causes the settings of the DSP Pan, DSP System
				Reverb Send, and DSP System Chorus parameters to
You can use this parameter to turn DSP line off for a particular
				be used in place of the Pan Pot, Reverb Send, and
channel, or to turn it on.				Chorus Send parameters.
	DS P	L i n e

DSP Part Parameters

■DSP Level (Range: 0 to 127)

Sets the post-DSP volume.

DS P L e v e l

■DSP Pan (Range: –64 to 0 to 63)

Sets the post-DSP stereo pan.

DSPP a n

E-50		735A-E-052B
WK3100_e_47-58.p65	50	04.3.26, 0:11 PM