Using the SMF Player

SMF PLAYER

ACCOMP VOLUME

START/STOP

Playing Back an SMF

Note that the first step you need to perform in the procedure below depends on whether you are playing back from Flash memory, a SmartMedia card, or a floppy diskette (WK-3500 only).

PREPARATION

•SmartMedia Card

•Insert the SmartMedia card that contains the data you want to play into the keyboard’s card slot.

•Floppy Diskette (WK-3500 Only)

•Insert the floppy diskette that contains the data you want to play into the keyboard’s floppy disk drive.

IMPORTANT!

•Never remove the SmartMedia card from the card slot or turn off the keyboard while card data is being accessed by a save, read, or delete operation. Doing so can corrupt the data on the SmartMedia card or even damage the card slot.

•Before ejecting a diskette, always check to make sure that the access lamp is not lit or flashing. A lit or flashing access lamp means that the keyboard is performing a data read or write operation. Ejecting a diskette while it is being accessed can cause its data to become corrupted.

CURSOR

Number buttons

[+]/[–]

EXIT

To play back an SMF

1What you should do first depends on whether you are playing back from Flash memory, a memory card, or a floppy diskette.

Flash Memory

2-1Use the SMF PLAYER button to display the “Internal” indicator in the text area of the screen.

•This causes the “SMF PLAYER” indicator to appear on the display.

I n t e r n a l

SmartMedia Card

2-2Insert the SmartMedia card that contains the file you want to play into the keyboard’s card slot. Use the SMF PLAYER button to display the “Card” indicator in the text area of the screen.

•This causes the “SMF PLAYER” indicator to appear on the display.

Floppy Diskette (WK-3500 only)

2-3Insert the floppy diskette that contains the file you want to play into the keyboard’s floppy disk drive. Use the SMF PLAYER button to display the “Disk” indicator in the text area of the screen.

•This causes the “SMF PLAYER” indicator to appear on the display.

3Press the [￿] CURSOR button to display the file selection screen.

•SMFs are those shows file names end with the extension “MID”. An error message appears at this time if there are no SMF files currently in Flash Memory.

E-86

 

735A-E-088A

WK3000_e_74-88.p65

86

04.3.26, 0:11 PM