Casio WK3000, WK3100, WK3500 Mo d u l a t, Mo d D e p t h, Value, Meaning, MODULATION Button Lamp, ■Modulation Assign (Range: *), ■Modulation Depth (Range: 0 to 127) (WK-3100/WK-3000 only)

Synthesizer Mode

■Modulation Assign (Range: *)

The Modulation Assign parameter specifies which parameters should be affected when you use the keyboard’s modulation function. Select “oFF” for any parameters that you do not want affected by the modulation function.

Mo d u l a t .

*

Value	Meaning
oFF	Off
vib	Control Change 01h (Modulation)
dp0	Control Change 16
	(Normally assigned to DSP Parameter 0.)
dp1	Control Change 17
	(Normally assigned to DSP Parameter 1.)
dp2	Control Change 18
	(Normally assigned to DSP Parameter 2.)
dp3	Control Change 19
	(Normally assigned to DSP Parameter 3.)
dp4	Control Change 80
	(Normally assigned to DSP Parameter 4.)
dp5	Control Change 81
	(Normally assigned to DSP Parameter 5.)
dp6	Control Change 82
	(Normally assigned to DSP Parameter 6.)
dp7	Control Change 83
	(Normally assigned to DSP Parameter 7.)

NOTE

•If the Modulation Assign setting of a tone is any setting from dp0 through dp7, that setting is ignored when the tone is used as a layered or split tone. DSP parameter effects are applied to the main tone only.

■Modulation Depth (Range: 0 to 127) (WK-3100/WK- 3000 only)

On the WK-3100/WK-3000, this parameter controls the modulation value when the MODULATION button is pressed. How the MODULATION button functions depends on the modulation assign parameter setting as described below.

If this setting is
selected for	Modulation is applied like this:
modulation assign:
	Modulation is applied to the depth specified
	by the value assigned to the Modulation
	Depth parameter as long as the
vib	MODULATION button is depressed.
	Releasing the MODULATION button causes
	the modulation value to return to the initial
	default value for the tone being used.
	Each press of the MODULATION button
	toggles modulation between the value
dp0 through dp7	assigned to the Modulation Depth Parameter
	and the initial default value for the tone being
	used.

Mo d D e p t h

MODULATION Button Lamp

The MODULATION button lamp lights when the current modulation depth is at its greatest possible setting. This can occur either when the MODULATION button is depressed or released, depending on the current Modulation Depth parameter setting and the initial default modulation depth value of the tone you are currently using.

735A-E-057C		E-55
WK3100_e_47-58.p65	55	04.3.26, 0:11 PM