2. 3 Alarm Connections
2. 3. 1 ALARM INPUT
Connect up to 16 alarm sensors using the supplied terminal blocks.
GND 1 2 3 4 5 6 7 8
2. 3. 2 ALARM OUTPUT
Connect up to 4 separate alarms to the Alarm Output.
Alarm may be triggered by numerous events including digital motion detection, Full Disk, Signal Loss, Power Off, Network Access.
The signal state is adjustable to N/O (Normaly Open) or N/C (Normaly Closed).
GND 1 | 2 | 3 | 4 |
| GND | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Notice
Each ALARM IN should be connected with GND which is grounded by TTL or contact point. Components z
Notice
The internal switching relays are rated for up to 24V at 1.0A maximum. Damage may occur if current is higher!
8
