Jefferson Direct Vent /Natural Vent Gas Heater
Jefferson Direct Vent/Natural Vent Stove Dimensions
See Page 6 for Flue Collar
Centerline Dimensions.
28���"
(724 mm)
Valve
Inlet C L
3"
(76 mm)
24" (610 mm)
8"
(203 mm)
14���"
(368 mm)
4188
Fig. 1 Jefferson dimensions.
Attention
The Jefferson stove is shipped from the factory as a Direct Vent Gas Heater. This heater may be converted into a Natural Vent unit in the field. If a Natural Vent Heater is desired, the CFM Corporation Z31B00 FSD- HAG Draft Hood must be directly installed to the top of the unit according to the installation instructions. The Draft Hood Adapter is available in the 7FSDHASK stove kit or as a separate item.
When the Jefferson stove is converted to Natural Vent, it uses 4” vent pipe. For aesthetic purposes the CFM direct vent system may be used up to the ceiling.
30004177 | 5 |
