Chaparral VFS113 Specifications, Item, SCSI, Physical, Connections, Specification, Fibre Channel

VFS113 Rack/Desktop Model User’s Guide

The EC command, as implemented in the Chaparral router, requires no administration. Administering an EC environment is most intensive on the application side. Chaparral supports the Storage Networking Industry Association Extended Copy Specification (ANSI T10/ 99-143R1). Any questions related to using a Chaparral router in an EC environment should be directed to the application provider or your reseller. If you are developing EC enabled applications, contact Chaparral for information on our specific implementation.

Specifications

The book title is a self-contained FC-to-SCSI router in a 1U enclosure with an integrated power supply. The router is ideal for attaching legacy SCSI storage devices to Fibre Channel SANs. You can install the unit in an industry-standard 19" cabinet using the Chaparral-supplied mounting brackets. The router can be installed in either front- mounting or rear-mounting configurations. Table 1-1provides additional product specifications.

		Table 1-1. Product specifications
Item	Specification
Physical	1U enclosure (1.75" H x 17" W x 10.5" D)
	Rack mount (with detachable brackets) or desktop use
	Front- or rear-mount in racks
	Weight: approximately 8 lbs
Fibre Channel	GBIC housing for either optical or copper cabling
	Supports data transfer up to 100 MB/sec
	(Devices connected via this port are referred to as front-end
	devices.)
SCSI	LVD/SE model
		Supports Ultra2 wide data transfer up to 80 MB/sec per
		channel
		Has internal SCSI termination
	HVD model
		Supports Ultra wide data transfer up to 40 MB/sec per channel
		Has internal SCSI termination
	(Devices connected to the SCSI channels are referred to as back-
	end devices.)
Connections	Fibre Channel (GBIC)
	Three SCSI Channels (68-pin)
	RS-232 serial port (RJ-12)

10BaseT Ethernet Port (RJ-45) AC Power

1-4