Chaparral VFS113 Note:, Solutions, Diagnostic Failure

VFS113 Rack/Desktop Model User’s Guide

Table 4-1. POST diagnostic errors and solutions

Diagnostic Failure	Solutions
Default hardware register	Replace the router.
Default chip set register	Replace the router.
Voltage/temperature	1. Check for thermal problems in the environment.
	2. Check any airflow obstruction.
	3. Replace the router.
Local DRAM memory test	Replace the router.
LVDS BIST	Replace the router.
PCI configuration	Replace the router.
verification
SCSI device scratch RAM	Replace the router.
I2C chip	Replace the router.
Buffer memory	Replace the router.
Programmable interval	Replace the router.
timer
Real-time clock chip	Replace the router.
Fibre Channel interface test	1. Check the firmware to make sure it matches the
	hardware configuration. See Upgrading Firmware on
	page 3-31if you need to update the firmware.
	2. Replace the router.

Note: POST diagnostics only display a voltage/temperature warning or failure. It does not result in an error. Voltage/temperature failures cause router shutdown after the router has booted.

Problem: The system hangs after the “All diagnostic tests passed” message or while scanning devices.

Solution: Follow these steps to resolve the problem:

1Verify there are no SCSI address conflicts.

2Check the connected SCSI devices to make sure everything is properly connected and SCSI termination is correct. See Restoring the Default Configuration Through the Flash Utility.

3If the devices work properly, replace the router.

4-2