Chaparral VFS113 Router Default Settings, LED, Color, Label, Setting, Default, Function, Description, For more information, see

VFS113 Rack/Desktop Model User’s Guide

Table 2-12. LED status lights (Continued)

LED	Description	Color	Function
Label
0	SCSI channel 0 activity	Green	Solid on when bus is active or busy
1	SCSI channel 1 activity	Green	Solid on when bus is active or busy
2	SCSI channel 2 activity	Green	Solid on when bus is active or busy
ST	Ethernet	Yellow	Flashing or solid when 10BaseT link
			is active or busy
LK	Ethernet	Yellow	Solid when 10BaseT link is
			connected

Router Default Settings

Table 2-13below lists the router default settings. If these settings meet your needs, you can use your router now. If they do not, you can change the settings. See Chapter 3, Configuring the Router.

Table 2-13. Router default settings

Setting	Default	For more information, see
Mapping Mode	AUTO	Changing the Mapping Mode (AUTO or
		FIXED) on page 3-20
Topology	LOOP	Selecting the Topology on page 3-7
Router’s loop ID	SOFT	Changing the Router’s Loop ID on page 3-8
Router’s LUN	SOFT	Changing the Router’s FC LUN on page 3-10
Router’s initiator ID	7	Changing the SCSI ID Assigned to Each
(SCSI ID) on each		Router Channel on page 3-12
channel
Scan Delay	0 seconds	Changing the Scan Delay on page 3-15
Alarm	ENABLED	Enabling and Disabling the Alarm on
		page 3-16

❒

2-12