Configuring the Router

If you selected LOOP, the Loop ID screen displays. To display the Router LUN screen, press Enter. If you want to change the Loop ID, you can do so. See Changing the Router’s Loop ID on page 3-8.

If you selected POINT-TO-POINT, the Router LUN screen displays. The text inside the parentheses ( ) shows the current Router LUN setting.

4Select the option or number you want to use and press Enter.

To

Do this

Let the router determine the its LUN



Select SOFT and press Enter.

each time the it powers up

 

This is the default setting.

 

 

 

Keep the same LUN for the router at



Select the [LUN] you want to use

all times

 

and press Enter.

 

 

This can be any number from 00 to 63.

 

 

 

Not assign the router an FC LUN



Select NONE and press Enter.

 

 

 

The system confirms that you want to make the change.

5Select Yes and press Enter to make the changes. The system confirms that the changes are made.

6Press Enter to return to the Configuration Menu.

7Reboot the router.

Note: If you change the topology, Loop ID, or router LUN, you must reboot the router for the change to take effect. See Rebooting the Router on page 3-19.

8If you entered a specific LUN, repeat steps 1 through 3 to see if the current router LUN, inside the parentheses ( ), is what you entered.

9If the LUN is not what you want, repeat steps 4 through 7.

3-11