VFS113 Rack/Desktop Model User’s Guide

5Press Enter.

If you want to change the router LUN, you can do so. See Changing the Router’s FC LUN on page 3-10.

The system confirms that you want to make the change.

6Select Yes and press Enter to make the changes. The system confirms that the changes are made.

7Press Enter to return to the Configuration Menu.

8Reboot the router.

Note: If you change the topology, Loop ID, or router LUN, you must reboot the router for the change to take effect. See Rebooting the Router on page 3-19.

9If you entered a specific Loop ID, repeat steps 1 through 3 to see if the current setting is what you entered.

Changing the Router’s FC LUN

You can change the router’s FC LUN to meet your needs. You can have three options for setting the FC LUN:

SOFT—Use this setting if you do not care if the router’s FC LUN changes when new devices are added to the back end. This setting assigns the last available FC LUN to the router.

Any number between 00 and 63—Select a specific number if you want the router’s FC LUN to stay the same when you add new devices and after you power down and power up.

NONE—Use this setting if you do not want the router to display as a device on the host.

To change the LUN:

1From the System Menu, select Configuration Menu and press Enter. The Configuration Menu screen displays.

2Select Host Configuration and press Enter. The Host Configuration screen displays.

3Select the topology you want and press Enter, or press Enter if the correct topology is already selected.

The current setting is marked with an * next to it. For information about the topology selection, see Selecting the Topology on page 3-7.

3-10