3. Setup

AC Power

Power Linking

Power Linking

Diagram

This product has an auto-ranging power supply and can work with an input voltage range of 100~240 VAC, 50/60 Hz. See the label affixed to the back plate of the product or refer to the specifications chart. The listed current rating indicates its average current draw under normal conditions.

Always connect this product to a protected circuit (circuit breaker or fuse). Make sure that it has an appropriate electrical ground to avoid the risk of electrocution or fire.

Never connect this product to a rheostat (variable resistor) or dimmer circuit, even if the rheostat or dimmer channel serves only as a 0 to 100% switch.

This product provides power linking via the Edison outlet located in the back of the unit.

1st Product

To other

2nd

Product

products

 

 

 

 

3rd Product

 

 

 

You can power link up to 37 Scorpion™ GBC 2.0 products on 120 VAC or up to 74 Scorpion™ GBC 2.0 products on 230 VAC.

You can power link up to 39 Scorpion™ RGY products on 120 VAC or up to 63 Scorpion™ RGY products on 230 VAC.

The power linking diagram shown above corresponds to the North American version of this product ONLY! If using this product in other parts of the world, consult with your local CHAUVET® distributor, as power linking connectors and requirements may differ in your country or region.

Page 10 of 52

Scorpion™ GBC 2.0/RGY User Manual (Rev. 2 ML)

Page 10
Image 10
Chauvet RGY, GBC 2.0 user manual Setup, AC Power, Power Linking