MAXIMUM SPEED 80MPH (129 km/h): To
acknowledge the warning, press the RESET button.
After you press the RESET button, a message will
reappear every 10minutes until this condition changes.
This message indicates that a malfunction is present
in the selective real time damping system. The vehicle
speed will be limited to a value determined by the
vehicle when the shock absorber system has failed and
the shocks are in their full soft mode. Have your
vehicle serviced by your GMdealer as soon as possible.
NO FOBS DETECTED: This message is displayed if
the vehicle does not detect the presence of a keyless
access transmitter when you have attempted to start the
vehicle or a vehicle door has just closed. The following
conditions may cause this message to appear:
•Driver-added equipment, such as two-way radios or
power inverters, is causing interference. Try moving
the keyless access transmitter away from these
devices when starting the vehicle.
•The vehicle is experiencing Electro-Magnetic
Interference (EMI). Some locations, such as airports
and some gas stations, have EMI fields which
may interfere with your keyless access transmitter.
If moving the transmitter to different locations
within the vehicle does not help, place the
transmitter in the glove box transmitter pocket with
the buttons facing to the right and then press
the START button.
NO FOB - OFF OR RUN?: This message is displayed
and a chime will sound when you turn off the engine,
but the vehicle does not detect a keyless access
transmitter in the vehicle. The vehicle will remain in
ACCESSORY until OFF or START has been pressed or
five minutes has expired. If you select OFF, the
vehicle cannot be started again without a keyless access
transmitter in the vehicle.
OPTIONS UNAVAILABLE: This message is displayed
for a few seconds if a keyless access transmitter
that is not labelled1 or 2 is used and you try to
personalize the features on your vehicle by pressing the
OPTION button. The personalization system will not
recognize the transmitter and the DIC will not display the
current driver number or the menus used to set
personalizations. The personalization features will then
be set to the default states. See DIC Vehicle
Personalization on page3-67 for more information.
PRESS BRAKE TO START ENGINE (Automatic
Transmission Only): This message is displayed if you
try to start the engine by pressing the keyless ignition
start button without having the brake pressed. The brake
needs to be pressed when starting the engine. See
Ignition Positions on page2-20 for more information.
3-58