To install the new wiper insert:
1. Slide the insert (D), notched end last, into the end
with the two blade claws(A). Slide the insert all the
way through the blade claws at the opposite
end(B). Plastic caps (C) will be forced off as the
insert is fully installed.
2. Be sure the notches are locked by the bottom
claws. Make sure that all other claws are properly
locked on both sides of the insert slots.
3. Putthe blade assembly pivot in the wiper arm hook.
Pullup until the pivot locking tab locks in the
hookslot.
4. Carefully lower the wiper arm and blade assembly
onto the windshield.
Installation guide:
A. Claw in Notch
B. Correct Installation
C. Incorrect Installation
5-50