DIC Vehicle Personalization
Many features on your vehicle can be personalized.
This means that the operation of these features can be
set to operate differently depending on who is driving
the vehicle. See “Personal Options” later in this section
for the features that you can personalize.
The personalization settings for other features are
automatically updated and saved as the driver adjusts
them. These include the following settings and presets:
•The radio presets, tone, volume, fade,
balance, equalization (EQ) settings and source
(radio or CD)
•The last climate control setting
•The Head-Up Display (HUD) position and dimming
level, if equipped
•The instrument panel cluster dimming level and last
selected DIC display
Separate personalization settings are saved for
two different drivers. One of the keyless access
transmitters is assigned to driver1. The other is
assigned to driver2. The back of the keyless access
transmitters are labelled1 or 2 to correspond to
each driver.
The current driver’s preferences are recalled when
one of the following occurs:
•The lock or unlock button on the keyless access
transmitter, labelled 1 or 2, is pressed.
•The appropriate memory button,1 or 2, located on
the driver’s door is pressed. See Memory on
page2-66 for more information.
•A valid keyless access transmitter is detected upon
opening the driver’s door.
If more than one valid keyless access transmitter is
detected upon opening the driver’s door, the driver
preferences for the lowest driver number will be recalled.
If a keyless access transmitter that is not labelled
1or 2 is used, the personalization system will not
recognize the transmitter. The Driver Information
Center (DIC) will not display a current driver number
and the features that are normally programmed through
the DIC will be set to the default states. Also, if the
OPTION button is pressed, the DIC does not display the
menus used to set personalizations, but instead
displays OPTIONS UNAVAILABLE for a few seconds.
3-67