3. Turn the bulb socket one-quarter turn
counterclockwise and pull it out.
4. Pull the bulb straight out to remove it from
the socket.
5. Push the new bulb in the bulb socket until it snaps
into place.
6. Reinstall the lamp assembly by first lining up the
tabs on the bottom of the lamp assembly with the
tabs in the vehicle, then slide it in.
7. Replace the screw at the top of the lamp assembly.

Replacement Bulbs

Exterior Lamp Bulb Number
Front Parking/Turn Signal 5702KA
Headlamp, High-Beam H9
Sidemarker W3W
Stoplamp/Taillamp/Turn Signal 3057KX
For replacement bulbs not listed here, contact
your dealer.
Windshield Wiper BladeReplacement
Windshield wiper blades should be inspected each time
maintenance is performed. See “Wiper Blade Check”
under Scheduled Maintenance on page6-4 for
more information.
Replacement blades come in different types and are
removed in differentways. For the proper type and
length, see Normal Maintenance Replacement Parts on
page6-13.
It is a good idea to clean or replace the wiper blade
assembly every six months.
Notice: Allowing the wiper blade arm to touch the
windshield when no wiper blade is installed
could damage the windshield. Any damage that
occurs would not be covered by your warranty. Do
not allow the wiper blade arm to touch the
windshield.
To remove the wiper blade assembly, do the following:
1. Openthe hood to gain access to
thewindshield wipers.
2. Lift the wiper arm until it locks into
a vertical position.
5-48