Adjusting the Speakers (Balance/Fade)
AUDIO: Toadjust the balance between the right and the
leftspeakers, push and release the AUDIO knob until
BALappears on the display. Turn the AUDIO knob to
movethe sound toward the right or the left speakers.
Toadjust the fade between the front and the rear
speakers,push and release the AUDIO knob until FADE
appearson the display. Turn the knob to move the sound
towardthe front or the rear speakers.
Toadjust the balance and the fade to the middle position,
pushthe AUDIO knob, then push it again and hold it until
youhear one beep. The balance and the fade will be
adjustedto the middle position and the display will show
thespeaker balance.
Toadjust all tone and speaker controls to the middle
position,push and hold the AUDIO knob when no tone or
speakercontrol is displayed. ALL will appear on the
displayand you will hear a beep.
Finding a Program Type (PTY) Station
(RDS and XM™)
To select and find a desired PTY perform the following:
1. Press the P-TYPE knob to activate program
type select mode. TYPE and a PTY will appear on
the display.
2. Turn the P-TYPE knob to select a PTY.
3. Once the desired PTY is displayed, press the
SEEK TYPE button to select and to take you to the
PTY’s first station.
4. To go to another station within that PTY and the
PTY is displayed, press the SEEK TYPE button
once. If the PTY is not displayed, press the SEEK
TYPE button twice to display the PTY and then
to go to another station.
5. Press the P-TYPE knob to exit program type
select mode.
If PTY times out and is no longer on the display, go
back to Step1.
If both PTY and TRAF are on, the radio will search for
the selected PTY and traffic announcements.
If the radio cannot find the desired PTY, NONE will
appear on the display and the radio will return to the last
station you were listening to.
3-77