Cisco Systems 1130AG manual Unpacking the Access Point, Package Contents

Chapter 2 Installing the Access Point

Unpacking the Access Point

Warning In order to comply with FCC radio frequency (RF) exposure limits, antennas should be located at a minimum of 7.9 inches (20 cm) or more from the body of all persons. Statement 332

Unpacking the Access Point

Follow these steps to unpack the access point:

Step 1 Open the shipping container and carefully remove the contents. Step 2 Return all packing materials to the shipping container and save it.

Step 3 Ensure that all items listed in the “Package Contents” section are included in the shipment. Check each item for damage. If any item is damaged or missing, notify your authorized Cisco sales representative.

Package Contents

Each access point package contains the following items:

•Cisco Aironet 1130AG Series Access Point or Cisco Aironet 1130AG Series Lightweight Access Point

•Cisco Aironet 1130AG Series Power Module (universal power module)–optional

•Mounting hardware kit

–One mounting plate

–Two suspended ceiling adjustable T-rail clips (accomodates standard and recessed T-rails)

–One security hasp adapter

–Four 6 x 32 x ¼ in. flat head Phillips machine screws

–One 8 x 32 x 3/16 in. pan head Phillips machine screw

–2 #8 plastic wall anchors

–2 #8 x 32 x 1 in. pan head screws

•Product quick start guide

•Translated safety warnings document

•Cisco product registration and Cisco documentation feedback cards

Cisco Aironet 1130AG Series Access Point Hardware Installation Guide

OL-8369-05 2-3