Cisco Systems 1130AG manual Suspended ceiling T-rail, 2-15

Models: 1130AG

1 126
Download 126 pages 59.84 Kb
Page 41
Image 41
Suspended ceiling T-rail

Chapter 2 Installing the Access Point

Mounting the Access Point Above a Suspended Ceiling

Follow these steps to mount the access point above a suspended ceiling. Refer to Figure 2-8before proceeding.

Figure 2-8 T-Bar Grid Mounting Bracket Parts

 

 

6

 

 

2

6

1

3

1

 

4

Step 1 Step 2

Step 3 Step 4

Step 5

Step 6

Step 7

 

 

5

121838

 

 

 

1

Suspended ceiling T-rail

4

Access point mounting bracket

2

T-bar box hanger

5

Access point

3

Bracket mounting clip

6

T-rail clip

Insert the bracket mounting clip’s tab into the rectangular hole on the access point mounting bracket.

Place the clip over the T-bar box hanger (refer to Figure 2-9) and secure it to the access point mounting bracket with the 1/4-20 fastener (supplied with the T-bar hanger).

Figure 2-9 T-Bar and Mounting Bracket

121839

Remove a ceiling tile adjacent to the mounting location.

Configure the ends of the T-bar box hanger to allow for maximum clearance above the ceiling tile. See the illustration above.

Open the access point cover and connect the Ethernet cable to the access point (see the “Connecting to an Ethernet Network with an Inline Power Source” section on page 2-22).

Attach the access point to the access point mounting bracket (see the “Attaching the Access Point to the Mounting Plate” section on page 2-16).

Attach the T-rail clips on the each end of the T-bar box hanger to the ceiling grid T-rails. Make sure the clips are securely attached to the T-rails.

Cisco Aironet 1130AG Series Access Point Hardware Installation Guide

 

OL-8369-05

2-15

 

 

 

Page 41
Image 41
Cisco Systems 1130AG manual Suspended ceiling T-rail, 2-15