Cisco Systems 1130AG manual Suspended Ceiling Adjustable T-Rail Clips

Chapter 2 Installing the Access Point

Deploying the Access Points on the Wireless Network

The mounting plate features are described below:

•Keyhole clips—used to attach the access point to the mounting plate. The keyhole clips slide into the keyhole slots on the bottom of the access point.

•Screw holes (A, B, C)—used to attach the suspended ceiling adjustable T-rail clips.

•Screw hole (X)—used to attach the mounting plate to a network cable box, wall, or ceiling. The mounting kit contains two 8 x 32 x 1 inch pan head screws and wall anchors for wall or ceiling mounting.

•T-bar hanger clip hole—used to attach a T-bar hanger clip.

•Security screw hole—used to secure the access point to the mounting plate.

•Padlock hole—used to attach a padlock (user provided) to secure the access point to the mounting plate. Compatible padlocks are Master Lock models 120T and 121T or equivalent. The security hasp adapter can also be used with the padlock for increase security protection.

Note The security hasp covers the cable bay area ( including the power port, Ethernet port, console port, and the mode button) to prevent the installation or removal of the cables or the activation of the mode button.

Suspended Ceiling Adjustable T-Rail Clips

The accessory kit contains two suspended ceiling adjustable T-rail clips; one for standard ceiling tile rails and the other for recessed ceiling tile rails. The clips are adjustable to accomodate three standard T-rail widths. Each clip contains detents that are used to adjust the clip to the T-rail. Each detent contains markings that indicate the T-rail width and the hole letter that corresponds to the correct mounting holes on the mounting plate. Figure 2-3shows the details of the adjustable T-rail clips.

Cisco Aironet 1130AG Series Access Point Hardware Installation Guide

2-8 OL-8369-05