Cisco Systems 1130AG manual Checking the Autonomous Access Point LEDs, 1 Access Point LEDs

Models: 1130AG

1 126
Download 126 pages 59.84 Kb
Page 52
Image 52
Checking the Autonomous Access Point LEDs

Chapter 3 Troubleshooting Autonomous Access Points

Checking the Autonomous Access Point LEDs

Checking the Autonomous Access Point LEDs

If your autonomous access point is not working properly, check the Status LED on the top panel or the Ethernet and Radio LEDs in the cable bay area. You can use the LED indications to quickly assess the unit’s status. Figure 3-1shows the access point LEDs (for additional information refer to the Event Log using the access point browser interface).

Figure 3-1 Access Point LEDs

1

2

3

4

121802

1

Status LED

3

Ethernet LED

 

 

 

 

2

Access point cover

4

Radio LED

 

 

 

 

Note To view the Ethernet and Radio LEDs you must open the access point cover (refer to the “Opening the Access Point Cover” section on page 2-11).

Note When the access point cover is opened, the Status LED colors are not visible.

Note There can be slight color variations in the Status LED of each access point.

Cisco Aironet 1130AG Series Access Point Hardware Installation Guide

3-2

OL-8369-05

 

 

Page 52
Image 52
Cisco Systems 1130AG manual Checking the Autonomous Access Point LEDs, 1 Access Point LEDs