Cisco Systems 1130AG manual Obtaining the Access Point Image File, Browser TFTP Interface, 3-19

Chapter 3 Troubleshooting Autonomous Access Points

Obtaining the Access Point Image File

Browser TFTP Interface

The TFTP interface allows you to use a TFTP server on a network device to load the access point image file. Follow these instructions to use a TFTP server:

Step 1 Open your Internet browser.

Note The access point web-browser interface is fully compatible with Microsoft Internet Explorer version 6.0 on Windows 98 and 2000 platforms and with Netscape version 7.0 on Windows 98, Windows 2000, and Solaris platforms.

Note When using the access point browser interface, you should disable your browser pop-up blocker.

Step 2 Enter the access point’s IP address in the browser address line and press Enter. An Enter Network Password screen appears.

Step 3 Enter your username in the User Name field.

Step 4 Enter the access point password in the Password field and press Enter. The Summary Status page appears.

Step 5 Click the System Software tab and then click Software Upgrade. The HTTP Upgrade screen appears. Step 6 Click the TFTP Upgrade tab.

Step 7 Enter the IP address for the TFTP server in the TFTP Server field.

Step 8 Enter the file name for the access point image file (such as c1130-k9w7-tar.123-8.JA.tar) in the Upload New System Image Tar File field. If the file is located in a subdirectory of the TFTP server root directory, include the relative path of the TFTP server root directory with the filename. If the file is located in the TFTP root directory, enter only the filename.

Step 9 Click Upload .

Step 10 When a message appears that indicates the upgrade is complete, click OK.

For additional information click the Help icon on the Software Upgrade screen.

Obtaining the Access Point Image File

The access point image file can be obtained from the Cisco.com software center using these steps:

Step 1	Use your Internet browser to access the Cisco Software Center at the following URL:
	http://tools.cisco.com/support/downloads/pub/MDFTree.x?butype=wireless
Step 2	Click Access Points > Cisco Aironet 1130 AG Series.
Step 3	Click Cisco Aironet 1130AG Access Point.
Step 4	On the Enter Network Password window, enter your Cisco.com username and password and click OK.
Step 5	Click IOS.
Step 6	Choose the Cisco IOS release desired, such as 12.3.8.JA.
	Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
OL-8369-05		3-19