Cisco Systems 2000.4.3a manual Corrective Action

Error Messages

Table 6	Error Messages (continued)
Error Message		Corrective Action
The current version of the RAID Firmware is		This message displays when the RAID firmware
<number>		on the server represents a later release than the
The RAID Firmware version tested on this system		version that was tested. To continue the
is <number>		installation, click OK. The installation does not
		downgrade RAID firmware.

Please note this system has not been tested with the detected RAID Firmware version of <number>

Press 'OK' to continue or 'Cancel' to abort the
installation
RAID Firmware Version Warning
The current version of the RAID Firmware is	This message displays when the RAID firmware
<number>	on the server represents a different release than
The RAID Firmware version tested on this system	the version that was tested. To continue the
is <number>	installation, click OK. The installation upgrades
	or downgrades the RAID firmware to the tested
The RAID Firmware will be automatically
	version.
adjusted as part of this installation.
Press 'OK' to continue or 'Cancel' to abort the
installation.
RAID Firmware Version Warning
The current version of the RAID BIOS is	This message displays when the RAID BIOS on
<number>	the server represents a different release than the
The RAID BIOS version tested on this system is	version that was tested. To continue the
	installation, click OK. The installation upgrades
<number>
	or downgrades the RAID BIOS to the tested
The RAID BIOS will be automatically adjusted as
	version.
part of this installation.
Press 'OK' to continue or 'Cancel' to abort the
installation.
RAID BIOS Version Warning
The transfer of the OS image to the hard drive	This message displays when the installation
failed!	cannot properly transfer the operating system to
This can be caused by scratched or smudged	the hard drive. Verify the condition of the DVD
	media and attempt the installation again.
DVD-ROM media or a hardware failure within the
system.
Fatal Error
A failure to program the BIOS was encountered.	This message displays when the installation
Error Code: <number>	cannot configure the system BIOS. Verify the
	health of server, and attempt the installation again.
Fatal Error

Installing the Operating System on the Cisco Unified Communications Server, Versions 2000.4.3 and 2000.4.3a

OL-10221-02 31