Chapter 6: The Jabra Device Firmware Updater
Running the Firmware Updater
4.On the first page of the Firmware Updater, you must identify the device you wish to update. Select the model number of your Jabra device from the drop- down list provided. Then click on Next.
5.Page 2 of the Jabra Firmware Updater opens.
Click on the Browse button to locate the
6. Page 3 of the Jabra Firmware Updater opens.
The Firmware Updater now switches your Jabra device into Device Firmware Upgrade (DFU) mode. In this mode the device appears as a new USB device to Windows and a special DFU driver is required.
If this is the first time you have placed your Jabra device in DFU mode on the current USB port, Windows will need to install a DFU driver for it. In this case, you will see the standard Windows Found New Hardware Wizard. Work through this wizard as usual, leaving all selections at their default settings. If the wizard is unable to find the driver automatically, then tell it to look for the driver in the location reported on page 3 of the Jabra Firmware Updater.
If the DFU driver has already been installed for your Jabra device (probably because you have run the Jabra Firmware Updater before), then you will not
see the Found New Hardware Wizard. This is normal.
After you have finished working with the Windows Found New Hardware Wizard (or if the wizard did not launch because it was not needed), click on Next on page 3 of the Jabra Firmware Updater.
Jabra PC Suite User’s Guide | 22 |
