11-17
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Chapter 11 Logs and Reports
Working with CSV Logs
Enabling or Disabling a CSV Log
This procedure describes how to enable or disable a CSV log. For instructions
about configuring the content of a CSV log, see Configuring a CSV Log,
page 11-19.
Note Some CSV logs are always enabled. For information about specific logs,
including whether you can disable them, see About Cisco Secure ACS Logs and
Reports, page 11-6.
To enable or disable a CSV log, follow these steps:
Step 1 In the navigation bar, click System Configuration.
Step 2 Click Logging.
Step 3 Click the name of the CSV log you want to enable.
The CSV log Comma-Separated Values File Configuration page appears, where
log is the name of the CSV log you selected.
Step 4 To enable the log, under Enable Logging, select the Log to CSV log report check
box, where log is the name of the CSV log you selected in Step 3.
Step 5 To disable the log, under Enable Logging, clear the Log to CSV report log check
box, where log is the name of the CSV log you selected in Step 3.
Step 6 Click Submit.
If you enabled the log, Cisco Secure ACS begins logging information for the log
selected. If you disabled the log, Cisco Secure ACS stops logging information for
the log selected.
User Password Changes CSAuth\PasswordLogs No
Cisco Secure ACS Active Service Monitoring Logs\ServiceMonitoring No
Table 11-5 Default CSV Log File Locations (continued)
Log Default Location Configurable?