Cisco Systems 3.3 Default Posture Validation Attribute Definition File

Appendix D CSUtil Database Utility
Posture Validation Attributes
D-52
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
CSUtil v3.3, Copyright 1997-2004, Cisco Systems Inc
Are you sure you want to delete vendor 9876; application 1; attribute 1? (y/n)
y
Vendor 9876; application 1; attribute 1 was successfully deleted
Step 4 If you are ready to make the attribute deletion take effect, restart the CSAuth and
CSAdmin services.
Caution While CSAuth is stopped, no users are authenticated.
To restart the CSAuth, CSLog, and CSAdmin services, enter the following
commands at the command prompt, allowing the computer time to perform each
command:
net stop csauth
net start csauth
net stop cslog
net start cslog
net stop csadmin
net start csadmin
Deleted posture validation attributes no longer are available in Cisco Secure ACS.
Default Posture Validation Attribute Definition File
Example D-2 provides the definitions for the posture validation attributes that we
provide with Cisco Secure ACS. Should you need to reset the default attributes to
their original definitions, use Example D-2 to create a posture validation attribute
definition file. For more information about the format of an attribute definition
file, see Posture Validation Attribute Definition File, page D-44.
Example D-2 Default Posture Validation Attribute Definitions
[attr#0]
vendor-id=9
vendor-name=Cisco
application-id=1
application-name=PA
attribute-id=00001