F-31
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Appendix F RDBMS Synchronization Import Definitions
Action Codes
353 SET_VSA_PROFILE V1, V2, V3 Sets the inbound/outbound profile of the VSA. The
profile specifies usage “IN” for accounting, “OUT”
for authorization, or “MULTI” if more than a singe
instance is allowed per RADIUS message.
Combinations are allowed.
V1 contains the vendor IETF code.
V2 contains the VSA number.
V3 contains the profile, one of the following:
IN
OUT
IN OUT
MULTI OUT
MULTI IN OUT
354 ADD_VSA_ENUM VN, V1,
V2, V3
Sets meaningful enumerated values, if the VSA
attribute has enumerated. In the User Setup section,
the Cisco Secure ACS HTML interface displays the
enumeration strings in a list.
VN contains the VSA Enum Name.
V1 contains the vendor IETF code.
V2 contains the VSA number.
V3 contains the VSA Enum Value.
Example:
VN = Disabled
V1 = 9034
V2 = MyCo-Encryption
V3 = 0
or
VN = Enabled
V1 = 9034
V2 = MyCo-Encryption
V3 = 1
Table F-6 Action Codes for Modifying Network Configuration (continued)
Action
Code Name Required Description