Cisco Systems 3.3 Action Codes for Creating and Modifying User Accounts

F-7
User Guide for Cisco Secure ACS for Windows Server
78-16592-01
Appendix F RDBMS Synchronization Import Definitions
Action Codes
Action Codes for Creating and Modifying User Accounts
Table F-3 lists the action codes for creating, modifying, and deleting user
accounts.
Note Before you can modify a user account, such as assigning a password, you must
create the user account, either in the HTML interface or by using the ADD_USER
action (action code: 100).
Transactions using these codes affect the configuration displayed in the User
Setup section of the HTML interface. For more information about the User Setup
section, see Chapter 7, “User Management”.
Table F-3 User Creation and Modification Action Codes
Action
Code Name Required Description
100 ADD_USER UN|GN,
V1
Creates a user (32 characters maximum). V1 is used as
the initial password. Optionally, the user can also be
assigned to a group.
101 DELETE_USER UN Removes a user.
102 SET_PAP_PASS UN, V1 Sets the PAP password for a user (64 ASCII characters
maximum). CHAP/ARAP will also default to this.
103 SET_CHAP_PASS UN, V1 Sets the CHAP/ARAP password for a user (64
characters maximum).
104 SET_OUTBOUND_
CHAP_PASS
UN, V1 Sets the CHAP/ARAP password for a user (32
characters maximum).