Cisco Systems 545 Serial manual About Gateway Features, Feature Description, TCS4

Models: 545 Serial

1 74
Download 74 pages 28.81 Kb
Page 8
Image 8

Chapter 1 Functionality

About Gateway Features

About Gateway Features

Table 1-1lists the major features of the Cisco Unified Videoconferencing 3545 Gateway.

Table 1-1 Gateway Feature Summary

Feature

Description

 

 

Interoperability

The gateway provides a high degree of interoperability with other H.323

 

compliant gateways, gatekeepers, terminals, proxy, and Multipoint

 

Control Unit (MCU) products by being based on the H.320 standard and

 

H.323 protocol stack.

 

 

Web-based

The gateway features the gateway interface. This is a web interface used

management

to configure and monitor the gateway. You can view and modify all

 

aspects of the gateway configuration from a remote location using a

 

Java-enabled web browser.

 

 

SNMP management

The gateway features Simple Network Management Protocol (SNMP)

 

management that supports all aspects of monitoring, diagnostics,

 

configuration, and trapping.

 

 

Diagnostics

The gateway features front and rear panel LED indicators that display

 

status for the unit. You can also access remote diagnostics of the unit

 

through the gateway interface, Telnet, SNMP, or a serial port.

 

 

Network load

The gateway supports load balancing on the network by communicating

balancing

with a gatekeeper through H.323 RAI (Resource Available

 

Indication)/RAC (Resource Available Confirmation) messages.

 

 

T.120 data

The gateway supports data transfers in calls between ISDN and IP by

collaboration

using high speed T.120 in HMLP and VarMLP formats.

 

 

Quality of service

The gateway features configurable coding of media packets to achieve

(QoS)

QoS routing priority on the Internet Protocol (IP) network. The Type of

 

Service (ToS) bits of the IP datagram header can be configured for priority

 

level.

 

 

Dial plan

The gateway supports a simplified dial plan for outbound dialing using a

 

single universal prefix. Using the dial plan, the gateway automatically

 

detects the capabilities received in the Setup message from the IP endpoint

 

and sets the same bit rate for the ISDN (or serial interface) side of the call.

 

 

Direct dialing and call

The gateway dial plan supports the following direct dialing and call

routing

routing facilities:

 

Direct Inward Dialing (DID)

 

 

Multiple Subscriber Network (MSN)

 

 

Q.931 Sub-addressing Information Element

 

Cisco Unified Videoconferencing 3545 Serial Gateway supports DID in

 

DCE mode only.

 

Internal and External Interactive Voice Response (IVR)

 

TCS4

 

Default extension

 

 

 

Installation and Upgrade Guide for Cisco Unified Videoconferencing 3545 PRI Gateway and 3545 Serial Gateway Release 5.5

1-2

OL-14912-01

 

 

Page 8
Image 8
Cisco Systems 545 Serial manual About Gateway Features, Feature Description, TCS4